Sirona CEREC MC XL Premium Package, Руководство по эксплуатации

Страница: 27 / 78

63 98 536 D 3439
D 3439
.
201.06.10
.
02 10.2017
27
Dentsply Sirona 5 Installation and startup
Operating Instructions CEREC MC XL Premium Package 5.4 Commissioning
båÖäáëÜ
5.4.7.4.4 Automatic mode
✔
The interface cable is connected.
➢ Set the on/off switch to the position
Auto
.
Note on the automatic mode:
The processing machine monitors the correct socket (interface cable and
suction tube) and the operation of the suction system during the running
processes.
5.4.7.4.5 Setting the suction power
Use the control dial (A) to set the suction power.
➢ Recommendation: Set the suction power to the minimum (
min
). To
increase the service life of the filter bags, you can increase the
suction power to the maximum suction power (
max
).
5.4.7.5 Connecting to the PC via WLAN (option)
Making the connection
Connect access point
➢ Connect the LAN port A of the milling and grinding unit and the
access point, using the network cable (10m, Order No.: 61 51 521).

The access point is pre-configured at the factory for this
application.
NOTICE
We recommended replacing the filter bag for the CEREC suction device
after approx. 120 restoration units. This number may differ depending
on the amount of zirconium oxide materials milled and suctioned.