Sirocco Royal Solo Apex, Руководство по ручной и дистанционной установке и инструкции пользователя

Страница: 13 / 48

13
The isolator tap or restrictor elbow must be fitted to the incoming supply to facilitate
servicing.
The gas pipe must be suitably protected where it passes through fireplace openings. Any
sleeving should be sealed to the pipe at its ends.
The open end of the gas supply pipe should be temporarily sealed to prevent ingress of dust
and dirt during installation.
SECTION: FLUE SPIGOT
When fitting the appliance with a flue liner an adaptor will be required, with the fire box in
place and the burner tray removed if a flue liner is required the flue adaptor (available
separately) should be fitted now. Attach the liner to the outlet spigot of the flue adaptor fix
into place by lifting into position through the fire box opening securing in place with self-
tapping screws supplied.
When fitting the appliance without the use of a chimney liner then the spigot plate must be
fitted.
Place the two pieces of protective card placed around the spigot plate on either side of the
fire box to protect the internal paint work.
Then pass the plate through the fire opening taking care not to damage the firebox and pass
through the locating slots either side of the fire outlet.