Sirocco Royal Solo Apex, Руководство по ручной и дистанционной установке и инструкции пользователя

Страница: 17 / 48

17
Note: Please ensure that the electrode spark igniters’ gap on the manual version
has not been misaligned during the handling of the burner in this installation the
gap should be 4 to 5mm from thermocouple.
If the fire is the remote control version then carefully place the tray into position and fit
batteries as per user guide instructions.
Remote Control options will need the 6 x AA batteries (Duracell Plus, Ever Ready Energizer
alkaline battery maybe used or Lithium type batteries can be used) to be placed within the
holder and connected to the battery lead and the battery placed in the batter holder at the
front of the fire, to ensure that the battery pack does not overheat.
Connect the gas supply and tighten the gas connections.
SECTION 8: FUEL BED LAYOUT
Place the decretive chippings Grey or Black all over the burner area, place these by the
handful do not pour as the dust could block the pilot assembly.
Leave the area around the pilot assembly clear to allow for good cross-lighting.
Place any additional fuel bed options as per their instruction supplied with these optio