Siqura PD900 Series, Руководство пользователя

Страница: 53 / 64

Web interface
Page 53
3.5.8 PTZ Setting
Flip
You can continuously track an object when it passes under the camera by setting Flip to Mechanical (M.E.) mode.
Note: The Flip setting can only be controlled manually. If a Preset Position or a point for another function (e.g.
Sequence) is set at a position that can only be reached by FLIP motion, and the Flip function is turned off, the position
cannot be reached anymore.
Note: To make the camera tilt between a specific range, such as -20° to +100°, go to the
Tilt Range setting page to set the tilt angle range. Otherwise, the camera will use 90° as the default tilt value.

M.E. Mode
M.E. is a standard mechanical operation. As the camera tilts to the maximum angle, it will pan 180° and
continue tilting to keep tracking objects.
Speed by Zoom
This function allows the camera to adjust the pan/tilt speed automatically by the internal algorithm when the zoom
ratio is changed. The rotating speed will become slower as the zoom ratio gets larger. Click the
Set button to activate
the function.
Auto Calibration (Servo Feedback)
Integrating Servo Feedback technology, the camera will calibrate and precisely return to the previous position
without stalling when deviation of the dome pivot is detected.
Select On and click the Set button to activate Auto Calibration.
Set Pan Zero
Click the Set button to set the camera’s current shooting position as the start point for panning (0 degrees).
3.5.9 RS485
The RS485 page serves to activate the pan/tilt function and select the RS-485 protocol used by the Joystick/Keyboard.
RS-485 Protocol Type
With the RS-485 protocol selected, you can remotely control the PTZ function of the camera using a Joystick/Keyboard.
Check the RS-485 protocol type of the Joystick/Keyboard. Then select the RS-485 protocol on the camera webpage,
and adjust the parameters from the drop-down lists on the right.
Click Save button to confirm the settings.
the Joystick/Keyboard from the drop-down list. The available protocols are DSCP , PelcoD , PelcoP and Diamond . After
the protocol type has been selected, adjust the parameters from the drop-down lists on the right. Click the Save
button to confirm the settings.
3.6 Logout
Select the Logout tab at the top of the page to open the Login window. This window enables you to log in with
another username.