Siqura PD900 Series, Руководство пользователя

Страница: 22 / 64

PD900 Series
Page 22
Provider
Select a DDNS host from the provider list.
Host name
Enter the registered domain name in the field.
Username/E-Mail
Enter the username or E-mail required by the DDNS provider for authentication.
Password/Key
Enter the password or key required by the DDNS provider for authentication.
3.2.5 Mail
The Mail category on the left gives access to the Mail parameters. The administrator can send an E-mail via Simple
Mail Transfer Protocol (SMTP) when an alarm is triggered. SMTP is a protocol for sending E-mail messages between
servers. SMTP is a relatively simple, text-based protocol, where one or more recipients of a message are specified
and the message text is transferred.
Two sets of SMTP can be configured. Parameters include SMTP Server, Account Name, Password and E-mail Address.
Contact the network service provider for more specific information about the SMTP server.
3.2.6 FTP
The FTP category on the left gives access to the FTP parameters. The administrator can configure the camera to send
the alarm messages to a specific File Transfer Protocol (FTP) site when an alarm is triggered. Alarm messages can be
assigned to up to two FTP sites. Enter the FTP details, including server, server port, username, password and remote
folder, in the relevant fields.
Click the Save button to confirm the settings.
3.2.7 HTTP
The HTTP category on the left gives access to the HTTP parameters. An HTTP Notification server can listen for the
notification messages from the cameras by triggered events. Enter the HTTP details, including the server name (for
instance, http://192.168.0.1/admin.php), username and password, in the relevant fields. Alarm triggered and Motion
Detection notifications can be sent to the specified HTTP server.
Click the Save button.
Note: Refer to Send HTTP notification for HTTP Notification in section 3.2.8.1.
3.2.8 Events (Alarm Settings)
The Event category on the left gives access to the Event parameters.
When clicking the Event button, a drop-down menu will appear with the following items:

Application

Motion Detection

Network Failure Detection

Periodical Event

Manual Trigger

Audio Detection
3.2.8.1 Application
The camera has four alarm inputs and two relay outputs for connection with the alarm system to catch event images.
Refer to the user manual or quick guide for the alarm I/O pin definitions to connect the alarm devices.