2
Safety and compliance
This section provides safety instructions and compliance information.
In This Chapter
2.1
Safety instructions
These instructions are intended to make sure that the user can use the product correctly and
avoid danger or property loss.
The precaution measure is divided into ‘Warnings’ and ‘Cautions’:
● Warnings: Serious injury or death may be caused if any of these warnings are neglected.
● Cautions: Injury or equipment damage may be caused if any of these cautions are
neglected.
Warnings
Follow these safeguards to
prevent serious injury or
death.
Cautions
Follow these precautions to
prevent potential injury or
material damage.
Warnings
● Use a power adapter which can meet the safety extra low voltage (SELV)
standard.The power consumption cannot be less than the required value.
● Do not connect several devices to one power adapter as an adapter overload
may cause overheating and can be a fire hazard.
● When the product is installed on a wall or ceiling, the device should be firmly
fixed.
● To reduce the risk of fire or electrical shock, do not expose this product to
rain or moisture.
● This installation should be made by a qualified service person and should
conform to all the local codes.
● Install blackout equipment into the power supply circuit for convenient
supply interruption.
● If the product does not work properly, contact your dealer or the nearest
service centre. Never attempt to disassemble the camera yourself. We shall
not assume any responsibility for problems caused by unauthorised repair or
maintenance.
6
