2
In Device No., type the camera number.
3
Click Save.
Reference information
The non-editable content on this tab serves as reference information for maintenance or
future configuration of the camera. Note that this information varies per model.
8.2
Time Settings
System > Time Settings
What this tab is for
On the Time Settings tab, you can set the device date and time manually or use an NTP
server. You can also configure the Daylight Saving Time (DST) settings here.
To set the time zone
1
Click to open the Time Zone list.
2
Select the location of the camera.
3
Click Save.
Note: The Time Zone list is not available if Sync. with computer time is selected.
To synchronise the system time with a Network Time Protocol (NTP) server
1
In the NTP section,click NTP.
2
In Server Address, type the IP address of the NTP server.
3
In NTP Port, type the port number of the NTP server.
4
In Interval, type the time interval (in minutes) between the consecutive time service
queries.
System
35
