Note: Registration on the DDNS server is required before you configure the DDNS settings
of the camera.
To turn on DDNS
1
Select Enable DDNS.
2
In the DDNS Type list, select the DDNS type you will be using.
3
Configure the DDNS settings for the selected type as described below .
4
Click Save.
A reboot is required for the settings to take effect.
To implement DynDNS
1
In Server Address, type the server address of DynDNS (for example,
members.dyndns.org).
2
In Domain, type the domain name obtained from the DynDNS website.
3
In User Name, type the user name registered on the DynDNS website.
4
In Port, type the port number of the DynDNS server.
5
In Password, type the password registered on the DynDNS website.
6
In Confirm, type the same password once more.
To implement IPServer
● In Server Address, type the server address of the IP Server.
To use the IP Server, you have to apply a static IP address, subnet mask, gateway and
preferred DNS from the ISP. Under “Server Address” should be entered the static IP
address of the computer that runs the IP Server software.
To implement NO-IP
1
In Server Address, type the server address as www.noip.com.
2
In Domain, type the domain name you registered.
3
In User Name, type the user name.
4
In Port, type the port number, if needed.
5
In Password, type the password.
6
In Confirm, type the same password once more.
After clicking Save, you can view the camera with the domain name.
To implement HiDDNS
1
Use the Locality list and Country list to define the applicable location(or select Custom).
2
In Server Address (if available), type the server address as www.hiddns.com.
3
In Domain, type the domain name of the camera.
The domain is the same as the device alias in the HiDDNS server.
Network
49
