background image

DNS Server

The Preferred DNS Server is the primary domain name server that translates domain names
and host names into the corresponding IP addresses. The Alternate DNS Server is a second
domain name server that is used if the Preferred DNS Server is unavailable. Configure the
DNS server settings if they are required for specific applications, such as sending email.

To configure the DNS Server settings

1

In Preferred DNS Server and Alternate DNS Server, type the IP addresses of the two
DNS servers.

2

Click Save.

Port numbers

Refer to the following table to change a default port number of the camera.

Port

Default value

Range

HTTP Port

80

Any unoccupied number

RTSP Port

554

1024~65535

HTTPS Port

443

Any unoccupied number

Server Port

8000

2000~65535

  

To change a port number

1

Replace the current port number with a value from the corresponding range in the table
above.

2

Click Save.
A reboot is required for the settings to take effect.

10.2

DDNS

Network > DDNS

  

What this tab is for

If your camera is set to use PPPoE as its default network connection, you can use the DDNS
tab to configure the Dynamic DNS (DDNS) for network access.

Network

 48 

Содержание pd1103








































































































Отзывы: