Simrad SH90 - REV A, Руководство оператора

Страница: 44 / 86

Simrad SH90
3 Click the desired user setting to select it.
4 Click the
Delete
button.
5 Click
OK
in the next parameter dialog to confirm the
selection.
The selected user setting is deleted.
How to load the factory settings
1 Click the
Setup
tab to open the
Setup
menu.
2 Click the
Default setting
button.
3 Click
OK
in the next parameter dialog to confirm the action.
The factory settings are loaded and implemented.
Installation of options
Optional functionality may be added to the SH90.
All options are pre-programmed into the standard sonar version.
When ordering a permanent option installation, a code word will
be released from Simrad. For installation of options, observe
the following procedures.
How to access the Install Options dialog
1 Select the
Setup
menu.
2 Click the
Test
button to open the
System test
menu.
3 Click the
Installation Menu
button.
4 Observe that the installation menu bar is shown on the top
of the screen.
5 Click
Options →Install options
.
6 Observe that the
Install Options
parameter dialog opens.
42
323773/C