Simrad SH90 - REV A, Руководство оператора

Страница: 33 / 86

Operational procedures
How to define and change the gear properties
The gear properties are changed by means of the
Gear
button
on the
Setup
menu.
1 Click the middle of the
Gear
button to open the parameter
dialog.
2 Click once on the gear you wish to use.
3 Click the
Edit
button at the bottom of the
Gear
parameter
dialog.
4 For each of the gear parameters available, select the
requested value.
5 Click
Close
when all the parameters have been defined.
How to investigate marker and symbol
information
1 Click the
Objects
tab to open the menu.
2
Observe that all the current objects (markers and symbols)
are listed.
• The
Objects
menu is shown in all display modes, and
displays the range (R), bearing (B) and depth (D) to all
selected objects.
• The identification (ID) abbreviations for the different
objects are:
– AT: Automatic target track marker
– Ci: Circle marker
– M: Target marker
– OS: Own Ship marker
– PT: Position track marker
– F: Radio buoy marker
• The number behind the ID abbreviation refers to the
same number on the object in the sonar presentation. The
“P” after the Automatic target track marker indicates the
priority level where the audio channel is locked to the
target.
• When you select a
Target marker
,
Automatic target track
marker
or a
Radio buoy marker
in the list, a dotted bearing
line from the vessel to the marker will be shown.
3 To retrieve the information about an object, click the object
abbreviation in the list.
323773/C
31