Simrad SH90 - REV A, Руководство оператора

Страница: 19 / 86

Getting started
Position the cursor on the centre of the menu button (C). Observe
that the shape of the cursor changes to a “menu” symbol. This
means that the applicable parameter dialog will open when you
press the
Select
button. The dialog appears in the lower part of
the menu field.
Changing a parameter value
Observe this generic procedure to change a parameter value.
Once you have gained more experience, and have become more
familiar with the available options, you will select the parameters
directly from the buttons.
Figure 5 Changing a parameter value
(C ) D015010C
B
C
D
A
1
Move the cursor to the middle of the menu button (A).
Observe that the cursor changes its shape to a menu symbol.
2 Press the
Select
button on the Operating Panel.
3 Observe that the corresponding parameter dialog (B) opens
at the bottom of the menu.
4
Move the cursor down to the dialog, position the cursor
over the requested parameter value (C), and press the
Select
button again.
5 Observe that the change you have requested takes immediate
effect on the sonar.
• This makes it easy to test the effect of each parameter
setting. Note however that transceiver related parameters
will first be operational in the next ping.
6 Move the cursor down to the
Close
button (D), and press
the
Select
button again.
7 Observe that the parameter dialog closes.
323773/C
17