Mounting — Mechanical connection
Operating Manual
Chain actuator – EA-K-30/xxx-T(-DA)
Chain actuator
– EA230-K-30/xxx(-S)
BA_EA(230)-K-30-XXX_EN_12
www.simon-protec.com
Date: 13.02.2019
Issue: 1.2 / 01.2019
Page 12
6.1.1 Mounting brackets
Determine the mounting position of the brackets so that the chain of the actuator will not collide with the (window / wing) frame
in any opening position of the window and the position of the chain is in the centre of the window; centre line markings are
provided on the K-K-50-OK for this purpose (see Figure 14 on page 13). In parallel / duo operation the actuators should be
positioned in such a way that the chains are located on 1/4 of the edges (left/right) of the window sash.
Secure the brackets with screws that are suitable for the respective window or the desired surface (screws / fixings are
not
included in the delivery), see Figures page 15 and page 16.
Insert the actuator in the support brackets and secure it with the two self-locking screws.
Figure 11: K-K30-K
Figure 12: K-K30-A
Figure 13: K-K30-FLEX
