Annex
Operating Manual
Chain actuator – EA-K-30/xxx-T(-DA)
– EA230-K-30/xxx(-S)
BA_EA(230)-K-30-XXX_EN_12
www.simon-protec.com
Date: 13.02.2019
Issue: 1.2/ 01.2019
Page 28
Operating Manual
BA_EA(230)-K-30-XXX_EN_12
11 Annex
11.1 Care and Maintenance
See supplementary sheet "Safety Instructions and Warranty
Conditions"!
short.simon-protec.com/sugen
11.2 General business and delivery terms
Deliveries and services are subject to the currently applicable
terms for products and services of the electrical industry
(green delivery terms), including the supplementary clause
“Extended retention of title”. These are published by the
German Electrical and Electronic Manufacturers' Association
(ZVEI), Frankfurt. If you are not aware of these, we will gladly
send them to you. You can also download these agreements
from
short.simon-protec.com/agben
The place of jurisdiction is Passau.
11.3 Company Addresses
11.3.1 System manufacturer
SIMON PROtec Systems GmbH
Medienstraße 8
94036 Passau
Tel.: +49 (0) 851 988 70 - 0
Fax: +49 (0) 851 988 70 - 70
E-Mail: [email protected]
Internet: www.simon-protec.com
11.3.2 Germany
SIMON PROtec Deutschland GmbH
Medienstraße 8
94036 Passau
Tel.: +49 (0) 851 379 368 - 0
Fax: +49 (0) 851 379 368 - 70
SIMON PROtec Deutschland GmbH
Ammerseestraße 75
D
–
82061 Neuried
Tel.: +49 (0) 89 79 17 0 - 11
Fax: +49 (0) 89 79 17 9 - 72
E-Mail: [email protected]
Internet: www.simon-protec.de
11.3.3 Switzerland
SIMON PROtec Systems AG
Allmendstrasse 38
8320 Fehraltorf
Tel.: +41 (0) 44 956 50 30
Fax: +41 (0) 44 956 50 40
E-Mail: [email protected]
Internet: www.simon-protec.ch
11.3.4 Hungary
SIMON PROtec Systems Kft.
Sodras utca 1. fszt. 1
1026 Budapest
Tel.: +36 (0) 30 552 0424
E-Mail: [email protected]
Internet: www.simon-protec.hu
12 Manufacturer's declaration
We hereby declare that the product complies with the applicable directives. The declaration of conformity can be read
at the company's premises and will be sent to you upon request. This declaration certifies that the product complies
with the mentioned directives, but does not represent any guarantee of the product's features. This declaration loses
its validity, if the product is modified without seeking our prior authorisation.
13 EC manufacturer’s declaration (distributor)
The installer is responsible for the proper mounting or commissioning, the preparation of the declaration of conformity in accordan-
ce with the EU directives and for affixing the CE marking. The CE marking must be affixed visibly!
