24
4.12 Heat pump control panel (local)
The heat pump control panel can be used locally ONLY by the
technical assistance service or by an authorised maintenance
technician.
1
2
3
4
5
Fig. 38
1
Display
2
ON/OFF button
3
Decrease button
4
Increase button
5
Settings button
4.13 Main control panel (remote)
The main control panel (MCP) allows all of the necessary adjustments to be made to
Murelle Revolution 25
and to the connected
systems.
It also serves as a main air thermostat and can therefore be used by all operators, users, authorised maintenance technicians and
the technical service for the operations for which each of these figures is authorised, as described in detail in the relevant sections.
It communicates with the boiler control panel with an unpolarised bus line and OpenTherm protocol, and with the heat pump control
panel with a RS485 polarised ModBus two-wire line.
It is equipped with a dry contact input for remote control, where relevant (GSM-Dialler/WiFi).
1
3
Gi 20 Set 2014
Zona
10:30
Menu
Modo
Modo: Inverno Progr. automatico - Set 18,0°C fino alle 11:30
2
17
16
15
14
13
12
11
9
10
8
4
6
5
7
Fig. 39
1
Button (A)
2
Multifunction encoder
3
Button (B)
4
Action carried out by pressing button (B)
5
Programmed time band
6
Description of adjustments in course
7
Measured outdoor temperature
8
Time
9
Presence of outdoor probe (OP)
10
Date
11
Measured ambient temperature
12
Modulation percentage
13
Flame
14
Controlled area
15
Request for heating (rad) or hot water (tap)
16
Heat pump operating
17
Action carried out by pressing button (A)
