15
4.3
Check and safety devices
The
Murelle Revolution 25
boilers are equipped with the following
check and safety devices:
– thermal safety thermostat 100°C
– 3 bar relief valve
– heating water pressure transducer
– delivery sensor
– DHW sensor
– smoke flue gas probe.
d
IT IS FORBIDDEN
to commission the appliance with safety devices which
do not work or which have been tampered with.
a
WARNING
Safety device may only be replaced by professional
qualified personnel using
Sime
original spare parts.
4.4
Identification
The
Murelle Revolution 25
boilers can be identified by means of:
1 Packaging label:
this is located on the outside of the
packaging and provides a code, the serial number of the
boiler and the bar code
2 Energy Efficiency Label:
this is positioned on the outside of
the packaging to notify the user of the energy savings and
reduced environmental pollution of the “packet”
3 Heat pump technical data plate:
this is located inside the front
panel of the boiler and provides the technical specification,
appliance performance and any other information required
by law.
4 Boiler technical data plate:
this is located on the side of
the appliance and provides the technical data, appliance
performance and any other information required by law.
4
3
1
4
3
2
1
Modello
Matricola
MURELLE REVOLUTION
SM16021614019
Alimentaz. Principale
Frequenza
230V
50 Hz
Potenza Max (W)
Corr. Max [A]
1650
6,8
Refrigerante
Carica Ref. [Kg]
R410a
1,00
Max pres. Frigo.Alta/Bas
Anno
41/27 bar
2016
MADE IN ITALY
Fonderie Sime SpA
Legnago VR (Italy) Tel 0442 631111
POMPA DI CALORE ARIA/AQUA PER RISCALDAMENTO
AIR TO WATER HEAT PUMP FOR HEATING SYSTEM
2
MURELLE REVOLUTION
X
XL
XL
A
A
A
++
A
MURELLE REVOLUTION
Cod. 6244754
X
Fig. 31
KEY:
1
Packaging label
2
Packet energy efficiency label
3
Heat pump technical data plate
4
Boiler technical data plate
