Sime MURELLE REVOLUTION 25, Инструкция для пользователя, по установке и обслуживанию

Страница: 8 / 68

8
– press the click encoder to confirm the highlighted “Mode”
and go to the “rows”
– Turn the encoder to “Boiler”
Esc Back
INFORMATION
Zone heating [...]
Boiler [...]
Heat pump [...]
Hot water [...]
Solar thermal [...]
ˆ
Esc Back
INFORMATION
Zone heating [...]
Boiler [...]
Heat pump [...]
Hot water [...]
Solar thermal [...]
ˆ
Fig. 9
– Press the click encoder to confirm the selection and go to
the screen showing the
“System pressure”
Boiler
Esc Back
Return temperature – –
°C
Power output 0
%
System pressure 0.9bar
Exhaust temp. 26
°C
Boiler
Esc Back
Return temperature – –
°C
Power output 0
%
System pressure 0.9bar
Exhaust temp. 26
°C
Fig. 10
– check that the system pressure as shown on the pressure
gauge when the system is cold , is between
1 and 1.2 bar
.
Where the value is different from 1-1.2 bar (the correct value),
open the filling valve again until this value is reached and then
shut it off again
– press the
Esc
button to go back to the
“Main screen”
m
CAUTION
To view the "System pressure", the row does not need
to be selected by turning the encoder .
– open one or more of the hot water valves and check that the
appliance starts up
Esc Back
Winter Off
Summer
Hot water MAN 40°C
Heating MAN 20.0°C
Holiday function OFF
Fig. 11
– allow the appliance to operate until hot water is produced and
shut off the valves opened previously.
1.3 Settings using the MODE button
From the
“Main screen”
:
Thu 18 Set 2014 Zone 10:30
Menu Mode
Off
Fig. 12
– Press the
Mode
button to view the “Function mode”
selection screen. Turn the encoder to select a mode
(e.g. “Winter”)
Esc Back
Winter
Off
Summer
Hot water MAN 40°C
Heating MAN 20.0°C
Holiday function OFF
Fig. 13
– press the click encoder to confirm the highlighted “Mode”
and go to the
“rows”
Esc Back
Winter
Hot water MAN 40°C
Heating MAN 20.0°C
Holiday function OFF
Fig. 14
– turn the encoder to select
“Heating”
– press the encoder to confirm
“Heating”
and access the
“Rows”
Esc Back
Heating
Function Mode MAN
Set AUTO comfort 20.0°C
Set AUTO reduced 18.0°C
Set MAN 20.0°C
Program. Time [...]
Fig. 15
– press the
click
encoder to confirm the highlighted
“Row”
and access the modifiable area