Simado GFXD1111S, Быстрый старт

Страница: 26 / 36

Sometimes, due to some programming error or due to some operating mistake,
GFXD1111S goes haywire and it become difficult to analyze the problem. In
such a situation, it is advisable to load default values in the system.
On defaulting GFXD1111S, following parameters will not change i.e. will not be
defaulted:
•
Call Divert
• Call Progress Tones
• Ring Type
• Enable/Disable SIM PIN
Default settings can be loaded or restored from the System Engineer mode.
Use following command to load the default configuration:
106-Reverse SE Password-#*
Reverse SE password is a number string of maximum 4 digits.
By default, SE Password is 1234. Therefore, Reverse of SE Password is
4321.
GFXD1111S will restart as soon as command to load the default configuration
is issued.
Ensure that the SIMADO GFXD1111S is set to SMS mode, when
command to restore the default configuration is issued else the system will
not be defaulted.
Step 10: Test Calls
Making a Call
• Lift the handset of the telephone instrument connected to SIMADO
GFXD1111S. You will get the dial tone.
• Dial the desired number. You will hear the RBT.
• Talk when the called party answers the call.
• Replace the handset to disconnect the call.
Receiving a Call
• Ring on telephone instrument connected to SIMADO GFXD1111S.
• Lift the handset to talk.
• You will be in speech with the calling party.
• Replace the handset when the call is disconnected.