Simado GFXD1111S, Быстрый старт

Страница: 13 / 36

You can reset the SE password to the default value by changing the jumper
position (J5). For more details, please refer System Security (Passwords)
feature in the System Manual.
System Administrator Level
At this level, system administrator does the programming. SA can program
and access only limited features that are required for the administrative
purpose. Following are the features that can be programmed from SA mode:
•
Change SA Password
• Display Software Version-Revision
• Display Call Duration
• Clear Call Duration
• Call Divert
For programming in SA mode, follow the steps given below:
•
Lift the handset of the telephone instrument connected to the system.
• Dial #*-18-SA Password (Default SA Password = 1111) to enter
programming mode.
• Enter the programming command.
• Dial 00-#* to exit the programming mode.
SE can reset SA password from the SE mode. For more details, please refer
System Security (Passwords) feature in the System Manual.
(Refer 'Programming GFXD1111S through FXS Port' in the System Manual
for more details)
3. Programming through Mobile Port
To program the system using Mobile Port, follow the steps given below:
•
Program the SIMADO GFXD1111S in ' SMS' mode using
command
231-1-#* .
• Prepare a text file (*.txt) containing programming commands in the
notepad.
• Get data services activated from the service provider for the SIM card
that is to be used for the programming in GFXD1111S.
• Set up the modem, in the computer from where programming is to be
done.
• Create hyper terminal connection. Establish the connection to upload
this text file into SIMADO GFXD1111S using Hyper-Terminal.
(Refer 'Programming GFXD1111S through Mobile Port' in the System Manual
for more details)