Simado GFXD1111S, Быстрый старт

Страница: 17 / 36

Use following command to clear network operator code in priority table:
332-Priority-#*
Use following command for selecting Mobile Frequency Band supported by
your network operator:
333-Mobile Band Selection-#*
Where,
Code Frequency in MHz for GSM Frequency Band for CDMA
1 900 Any CDMA
2 1800 Cellular A or B
3 1900 Cellular A
4 850 + 1900 Cellular B
5 900 + 1800 Any CDMA
By default, Mobile Band Selection for GSM will be '900 + 1800' and for
CDMA it will be 'Any CDMA'.
Frequency Band selection not required if 3G module is installed in
SIMADO GFXD1111S.
(Refer 'Mobile Network Selection' feature in System Manual for more details)
You can check the strength of network signals on the LCD of telephone
instrument connected to the FXS port of GFXD1111S.
Use following command to display the Signal Strength:
#*11
(Refer 'Signal Strength' feature in System Manual for more details)
Step 5: Port Parameters-Mobile
Enable/Disable Mobile Port:
Use following command to enable/disable the Mobile Port:
201-Flag-#*
Where,
Flag Meaning
0 Disable
1 Enable
By default, the mobile port is enabled.
Enable/Disable CLIR on the Mobile Port:
Use following command to enable/disable CLIR on the mobile port:
202-Flag-#*
Where,