Simado GFXD1111S, Быстрый старт

Страница: 12 / 36

LED Indication
Indicates that FXO Port is OFF-Hook.
Indicates that FXO Port is ON-Hook.
Indicates that FXO Port is ringing.
NA
SIM module is OFF.
Slow SIM module is ON and is registered with the
network i.e. network is available.
Fast SIM module is ON but is not registered with
the network i.e. network not available.
Activity
FXO ON
OFF
Blinking
NW
(controlled by
Module) ON
OFF
Blinking
a. Applicable only when Call Minutes feature is enabled for Mobile Port. (Refer
'Call Minutes' for more details)
Programming SIMADO GFXD1111S
Programming of SIMADO GFXD1111S can be done in following ways:
1. Programming through COM Port
To program the system using communication port, follow the steps given
below:
•
Program the SIMADO GFXD1111S in 'Report Generation' mode using
command
231-3-#* .
• Prepare a text file (*.txt) containing programming commands in the
notepad.
• Upload this text file into SIMADO GFXD1111S using Hyper-Terminal.
(Refer 'Programming GFXD1111S through COM Port' in the System Manual
for more details)
2. Programming through FXS Port
In SIMADO GFXD1111S, programming can be done at two levels viz. System
Engineer Level and System Administrator level:
System Engineer Level
At this level, System engineer does the programming.
For programming in SE mode, follow the steps given below:
•
Lift the handset of the telephone instrument connected to the system.
• Dial #*-19-SE Password (Default SE Password = 1234) to enter
programming mode.
• Enter the programming command.
• Dial 00-#* to exit the programming mode.