Simado GFXD1111S, Быстрый старт

Страница: 14 / 36

4. Programming using SMS
To program the system using SMS, follow the steps given below:
•
Enable 'SMS Based Configuration' option using command:
112-Code-#* , where Code is 0 for Disable and 1 for Enable.
• Type a text message in your cell phone. Include all the desired
configuration commands in the message in required format.
• SMS meant for configuring the system should always start with
#*19-SE Password i.e. the command for entering the programming mode
and should end with 00#* i.e. the command to exit the programming
mode.
• The commands for configuring the system should be typed between the
command for entering and exiting the programming mode.
• Maximum message length of SMS meant for configuring the system is
160 characters.
• After typing the message send it to the SIM Card number installed in
GFXD1111S.
• When GFXD1111S receives this SMS, it will execute the commands in
the SMS and thus configure the system.
(Refer 'Programming GFXD1111S using SMS' in the System Manual for more
details)
Programming of various features of SIMADO GFXD1111S is shown below:
Step 1: Configuration Type
SIMADO GFXD1111S can be configured either in Mobile-FXS Mode or Mobile-
FXO Mode.
•
In Mobile-FXS Mode, all three ports viz. Mobile, FXO and FXS are functional.
By default, system is configured in this mode of operation.
• In Mobile-FXO Mode, only two ports viz. FXO and Mobile are functional. In
this type of configuration, FXS port is used only for programming the system.
This type of configuration is useful when a mobile user wants to access the
station/trunk line of the PBX via GSM/CDMA network.
Use following command to set the Configuration Type for SIMADO
GFXD1111S:
100-Configuration Type-#*
Where,
Configuration Type Meaning
1 Mobile-FXS Mode
2 Mobile-FXO Mode
By default, Configuration Type is Mobile-FXS mode.