Simado GFXD1111S, Быстрый старт

Страница: 11 / 36

• Connect Power Socket of GFXD1111S to the DC Jack using 12V DC Power
Adaptor provided to you and switch ON the power supply.
Switching ON SIMADO GFXD1111S
After connecting the system as shown above, switch ON the power supply.
At Power ON (During Reset Sequence):
• LED labeled as 'PWR' will glow green continuously.
• LED labeled as 'FXO', 'FXS' and 'RDY' will blink (RED) four times (500ms
On, 500ms Off) and then turns Off.
• LED labeled as 'NW' starts blinking (RED) after few seconds of Power On. It
indicates the network availability.
• When SIM Card is detected, LED labeled as 'RDY' will start blinking (RED)
slowly (1 sec On- 1 sec Off) till successful network registration. After that, it
will glow RED continuously. Network registration takes approximately 90
seconds.
• LED labeled as 'RDY' will blink (RED) fast (100 msec On- 100 msec Off) if
SIM Card is absent or deactivated or SIM PIN is faulty or SIM PUK is required.
Once the system is switched ON, it attains the normal working position in few
minutes.
During Normal Functioning:
Following table shows various LED indications during the normal functioning of
the system:
LED Indication
Indicates that GFXD1111S is power On.
Indicates that GFXD1111S is power Off.
NA
SIM Card is present and active.
GFXD1111S powered On but SIM Card is
not detected.
SIM card is absent or de-activated or SIM
PIN is faulty or SIM PUK is required.
SIM Card detected but is not registered with
the network.
Indicates that either:
1. 20 minutes or less than 20 minutes of free
Call Minutes are left.
OR
2. The free Call Minutes allocated to the
Mobile Port are utilized.
Indicates that FXS Port is OFF-Hook.
Indicates that FXS Port is ON-Hook.
Indicates that FXS Port is ringing.
Activity
PWR ON
OFF
Blinking
RDY ON
Off
Blinking (100 msec On-
100 msec Off)
Blinking (1 sec On-1
sec Off)
Blinking (2000 msec
On- 2000 msec Off)
a
FXS ON
OFF
Blinking