Simado GFXD1111S, Быстрый старт

Страница: 15 / 36

Step 2: SIM PIN
SIM PIN is a security feature used by the GSM network. This feature is used to
protect the SIM card inserted in the system from being mis-used.
Follow the steps given below to enable SIM protection in GFXD1111S:
•
Switch Off GFXD1111S.
• Remove SIM card and insert the same in the mobile instrument.
• Enable 'SIM PIN at Power ON' parameter in the SIM card.
• Change the SIM PIN of the SIM card to 1234. (Default SIM PIN programmed
in the system is 1234) The SIM PIN of the card and that of the system
should be same else the SIM PIN will not be accepted by the GSM module
at power on.
• Remove SIM card from the mobile instrument and insert it in GFXD1111S.
• Switch on the system and change the default SIM PIN after GFXD1111S
attains normal working position.
SE should take above steps to change the SIM PIN of the SIM card in case
SIM protection of SIM card is enabled and SIM PIN of SIM Card and
GFXD1111S is different else GFXD1111S will not initialize.
Use following command to change the SIM PIN:
113-New SIM PIN-#*
Where,
New SIM PIN can be of minimum 4 digits and maximum 6 digits.
Valid digits for SIM PIN are 0 to 9.
By default, it is 1234.
Use following command to register Personal Unlock Key:
114-PUK Number-SIM PIN-#*
Where,
PUK number is unique 8 digit number assigned to the SIM card.
SIM PIN is old/(default) four digit PIN number of SIM card.
SIM PIN feature is also supported when Wavecom-CDMA (Q2438K) module
is installed in SIMADO GFXD1111S.
(Refer 'SIM PIN' feature in System Manual for more details)
Step 3: Date and Time
SIMADO GFXD1111S is equipped with built in Real Time Clock (RTC) circuit.
This circuit is to be set once with current date and time values. It then updates
itself regularly to keep track of the parameters.