Simado GFXD1111S, Быстрый старт

Страница: 21 / 36

Where,
Disconnect Signal Meaning
0 None
1 Battery Revrsal
2 Open Loop Disconnect
By default, Disconnect Signal is Battery Reversal.
Use following command to program Open Loop Disconnect Timer on the
FXO Port:
219-Open Loop Disconnect Timer-#*
Where,
Open Loop Disconnect Timer is from 001 to 999 ms.
By default, it is 200 ms.
Keep Open Loop Disconnect Timer as less than what is actually supported
by the PSTN network.
Use following command to enable/disable disconnect tone detection on FXO
Port:
320-Code-#*
Where,
Code Meaning
0 Disable
1 Enable
By default, it is enabled.
Use following command to program Disconnection Tone's ON Time for FXO
Port:
321-ON Time-#*
Where,
ON Time is form 0001 to 9999 ms.
By default, it is 750ms.
Use following command to program Disconnection Tone's Off Time for FXO
Port:
322-Off Time-#*
Where,
Off Timer is form 0001 to 9999 ms.
By default, it is 750ms.
When call is disconnected, the user will get error tone.
(Refer 'Port Parameters- FXO' in System Manual for more details)