Sim2 NERO 1, Руководство пользователя

Страница: 6 / 60

NERO1
User Guide
6
Observe the following instructions:
•
When you no longer wish to use your electrical and electronic equipment,
take it to your local waste disposal facility for recycling.
•
You may return your old equipment to your SIM2 Authorized Dealer free of
charge when you buy a new product that is equivalent or has the same
functions as the old one. Contact SIM2 to find your local dealer.
•
If you need more information regarding recycling, reuse and product
exchanges, contact SIM2 customer service.
Lastly we suggest further measures to safeguard the environment, such as recycling
of internal and external packaging (including that used for shipping) in which the
product was delivered. With your help, we can reduce the amount of environmental
resources required to make electric and electronic equipment, reduce the use of
waste tips for used equipment and, in general, improve our quality of life by making
sure that hazardous materials are correctly scrapped. Incorrect treatment of the
product at the end of its service life and failure to follow the above disposal
instructions are punishable under local legislation.
Notice
The appliance has been subjected to exhaustive operating tests by SIM2 to guarantee
the highest quality. The projector light source life should thus initially be around 30-
60 hours. In addition to the customary checks, the Quality Control department also
runs additional statistical tests before shipment. In such cases, the packaging may
show signs of having been opened, and the hours of light source operation may prove
to be higher than those normally shown when only standard tests are performed.
As the optical system of the NERO1 is extremely compact and has the purpose of
developing very high brightness and contrast, it is possible that a small quantity of
light is visible outside of the projection area and will vary depending the zoom and
shift setup. This characteristic of the optical system is to be deemed as normal. In
order to reduce this effect SIM2 recommends that the area surrounding the
projection screen is as dark as possible.