Sim2 NERO 1, Руководство пользователя

Страница: 51 / 60

NERO1
User Guide
51
C3X and LUMIS bracket compatibility
Put between the plate of the C3X/LUMIS
bracket and the bottom of the projector the
spacer supplied (A position is for the 25 mm
length spacer and the B position is for the
35 mm length)
Align the bracket to the projector using the
mounting holes as shown below and secure
it using three M6 screws.
F G
SFM150 & SFUNI
Put between the plate of the bracket and
the bottom of the projector the spacers
supplied (only the 25 mm length spacer)
Align the bracket to the projector using the
slotted mounting holes as shown below
and secure it using M6 screws.
H
I
Note: If you use a bracket that is not approved by SIM2 always use the spacers for
spacing the metal bracket from the bottom of the projector (this to assure a cooling
system to the projector).
A
A
B