Sim2 NERO 1, Руководство пользователя

Страница: 24 / 60

NERO1
User Guide
24
•
Auto: Display the native format
•
SBS - Side by Side: Display 3D signal in “side by side” format. Left and right halves
of the image are separated, rescaled and displayed. This mode should be applied
to 3D images composed of two stereoscopic images compressed to half of their
original horizontal resolution and sent simultaneously.
•
Top and Bottom: Display 3D signal in “Top and Bottom” format. Top and bottom
halves of the image are separated, rescaled and displayed. This mode should be
applied to 3D images composed of two stereoscopic images compressed to half of
their original vertical resolution and sent simultaneously.
•
Frame Sequential: Display 3D signal in “Frame sequential” format. This mode
should be applied to 3D images that consist of a sequence of alternating frames
wherein each successive frame carries the image meant for one or the other eye.
•
2D → 3D: 2D signal transform 3D signal.
3D → 2D
You can choose one of the following options:
•
3D : display the 3D signal.
•
L (left): display the left frame of 3D content.
•
r (right): display the right frame of 3D content.
2D → 3D
This features permit to select 3D depth of field (or strength) from Low, Middle or High.
Use this setting if the 3D effect has an uncomfortable look about it. This setting will
change the perception of depth. It is important that the image destined for the
left/right eye reaches the correct eye (see 3D Sync Invert below).
3D Sync. Invert
You may need to change the order in which left and right frames are displayed.
Sometimes the easiest way to check if the image destined for the left/right eye
reaches the correct eye, is to pause the program content.
•
ON: invert left and right frame contents.
•
OFF: for default frame contents.