Sim2 NERO 1, Руководство пользователя

Страница: 27 / 60

NERO1
User Guide
27
Main Menu
The main menu gives access to all projector adjustments. It is divided in four main
sections:
•
Image
•
Display
•
System
•
Setup
with various item and submenus in each of them.
To enter the main menu and select the desired section press on the remote
control. To enter a submenu (when available) press
! on the remote control.
Use ▴ or ▾ to select an item on a list either in the main menu and the submenu.
To return to the previous menu when in a submenu press on the remote control.
To select menu items press
$% on the remote control. To turn off the main menu
press on the remote control. Use $% to change settings on a selected item.
Note: Depending on the selected input source and signal characteristics, some
adjustments may not be available.
Image
and Display menu sections provide access to most commonly-used projector
adjustments. Note that:
•
you can enter these sections only when an image is displayed;
•
the controls in these sections only operate on the active input;
•
when you select another input or change mode (2D/3D), all the settings in these
sections are automatically saved;
•
each time you select an input or change mode (2D/3D), the previously saved
settings for that input or mode will be automatically recalled;
System and Setup sections provide access to installation and OSD adjustments. The
settings in these sections are global (for all inputs and modes, not just the active one).