Sim2 NERO 1, Руководство пользователя

Страница: 54 / 60

NERO1
User Guide
54
HDMI Connection Issues
3D requires a substantial data throughput therefore use a good quality High Speed
HDMI cable – with or without Ethernet.
Avoid using excessively long HDMI cables as this contributes to poor connection
issues.
Cable lengths over 10 m are not recommended.
Avoid using HDMI cables that have illuminated plugs or active systems that draw on
the 5 V supply rail. If the 5 V drops lower than 4.7 V you will not get any picture!
Sparkles of random color on screen. This usually means that the cable doesn’t have
the bandwidth capabilities to handle the signal.
Try changing the cable or use a shorter cable.
Try using a lower resolution for example if you are using 1080p try switching to 1080i.
If this solves the problem the cable is the likely culprit.
When switching inputs on either the projector or the AV Receiver/Processor
sometimes the picture is either green or pink. This usually means the incorrect color
standard has been selected. This is sent automatically every time you switch HDMI
inputs but sometimes the information is not received by the display.
Reselect input, if problem persists disconnect the HDMI cable to either the display or
output of the receiver and reconnect – this instigate a hot-plug detect and should
resolve the issue.
If the problem persists check with your AV receiver/processor/Blu-ray manufacturer
for the latest software updates.
Try a different HDMI cable.
Snowy picture. This means that the HDCP system has not authorized the playback of
the material.
Usually re-selecting the input will resolve the problem.
If the problem persists then it is more than likely to be cable related. Try other cables.
Try bypassing other product in the system chain. For example connect the Blu-ray
player direct to the projector.