Sim2 NERO 1, Руководство пользователя

Страница: 14 / 60

NERO1
User Guide
14
4 Installation
This section provides instructions for the installation of the NEOR3 projector.
Important: Installation procedures should be performed by a qualified AV system
specialist.
Location
When installing the NERO1 projector, take the following considerations into account.
Installation Type
Select the installation type that best suits your needs:
•
front or rear projection
•
floor or ceiling mount
Cooling
Make sure that the planned location for the projector has adequate ventilation. Check
that room temperature is below 35° C and that the projector is away from heating
vents. Ensure a minimum 0.20 m (5 in.) clearance on the left, right and rear sides of
the projector.
Power Outlets
Verify that the powers outlets are grounded and preferably shielded from power
surges and fluctuations. A UPS is optional. NERO1 power supply operates on any
nominal line voltage between 100-240 V AC, 50-60 Hz.
Cables
Check planned cable lengths for video and control cables and make sure these lengths
do not exceed specifications.
Ambient Light
Avoid or minimize light sources directed at the screen to preserve the quality of the
projected image.