Sim2 NERO 1, Руководство пользователя

Страница: 50 / 60

NERO1
User Guide
50
7 How to install a bracket to the NERO
This quick guide explain how to install a bracket to the NERO.
For ceiling mounting use only SIM2-approved ceiling brackets and adhere to the
installation instructions and safety guidelines provided with the bracket. Do not over-
tighten the screws.
The screw to fix the bracket has to not exceeding 15 mm in thread length inside the metallic base
of the bottom of the projector.
Remove the four elevator feet from the
bottom of the projector as indicated on the
image.
In the accessories of the projector there are
5 spacers: 4 pcs of 25 length (A) and 1 pcs
of 35 length (B). The spacers have to been
put between the bottom of the projector
and the metallic plate of the bracket.
B C
Anamorphic lens bracket compatibility (System Flex)
Put between the plate of the bracket and
the bottom of the projector the spacer
supplied (A position is for the 25 mm length
spacer and the B position is for the 35 mm
length)
Align the sled bracket to the projector using
the slotted mounting holes as shown below
and secure it using three M6 screws as
shown.
D
E
A A
B