6.1.2 Securing the keys in the clamps
1) Position the original key (left-hand jaw) and key blank (right-hand jaw), ensuring that:
a) the keys are well positioned and secured in the clamp;
b) the key stop is resting against the calibration tab (H);
2) Secure the keys by closing the clamps with the knobs (F).
3) Lower the gauge rod by turning knob (G).
3
4
4
B
C
D 12
D
3
2
1
A
4
4
B
C
D 12
D
3
2
1
A
3
4
4
B
C
D 12
D
3
2
1
A
3
4
4
B
C
D 12
D
3
2
1
A
H
H
F
F
G
Fig. 25
6.1.3 Key cutting
ATTENTION: make sure the gauges (H) have been lowered.
Once activated with the switch (O) the REKORD PRO d-12 machine is ready for the cutting operation:
1) Unlock the carriage with the lever (B) to activate the motor and move the carriage towards tracer/cutting tool.
2) Keep the tracer on the cuts starting from the head stop (Fig. 26).
3) To copy the key move the carriage sideways from right to left by means of the lever (D). In case of double cuts
repeat the operation in the second side of the key.
4)
Lower and lock the carriage.
5)
Remove the keys from the clamps.
6) Turn on the motor with push-button (N) and smooth off the key edges by means of the brush (P).
3
4
4
B
C
D 12
D
3
2
1
A
4
4
B
C
D 12
D
3
2
1
A
3
4
4
B
C
D 12
D
3
2
1
A
3
4
4
B
C
D 12
D
3
2
1
A
Fig. 26
Operating manual
REKORD PRO d-12
Copyright Silca S.p.A 2022
18
