Fig. 59
Fig. 60
10)
Return the machine to its upright position
.
11) Install the belt and tighten the 4 screws (S1) (Fig. 55) of the plate motor.
12) Push the belt tightener (P1) downwards to tighten the belt and secure it with the screw (P2).
13)
Turn the machine over onto its back.
14) Connect the connectors (S2) (Fig. 49) to brush push-button and fit the earth wire to its screw with the nut (S5)
(Fig. 62).
15)
Replace the condenser and secure with washer and nut.
16) Replace the bottom plate and secure with the 6 screws (Fig. 39).
17)
Return the machine to its upright position.
18) Replace the top cover and secure with the 3 screws (M1) (Fig. 51).
19)
Replace the pads.
Fig. 61
Fig. 62
Operating manual
REKORD PRO d-12
Copyright Silca S.p.A 2022
32
