7.3
Replacing the tracer point
ATTENTION: remove the mains plug.
1) Remove the two pads (Fig. 34).
2) Loosen the 3 screws (M1) and remove the top cover (M) (Fig. 34 and Fig. 35).
3) Loosen the screw (K1) (Fig. 36).
4) Loosen the grub screw (J1).
5)
Loosen the tracer point by turning it anticlockwise until is fully released.
6)
Fit the new tracer point and screw down to the end of run.
7) Tighten the grub screw (J1).
8) Tighten the screw (K1).
9)
Re-set the machine as described in chap.5.2.
M1
M
Fig. 34
Fig. 35
K
J
J1
Fig. 36
Fig. 37
Operating manual
REKORD PRO d-12
Copyright Silca S.p.A 2022
23
