6 CUTTING OPERATIONS
ATTENTION: for complete safety during the cutting operations, take the following precautions:
• Always work with dry hands.
• Check that the machine is properly earthed.
• Wear protective goggles even if the machine has a protective shield over the cutting tool.
• Start the motor (unlocking the carriage) only after completing the operations on the carriage (key
insertion/removal..).
•
Take care not to push the cutter/brush motor start button (N) (Fig. 6) during operations on
the carriage (key insertion/removal...).
• Keep hands away from the cutting tool in motion.
• Before duplicating, remove the gauges.
6.1 Key cutting
Fig. 20
Place the clamps on the required side (see chap.6.1.1):
-
Side A
of the clamp: for keys to be fitted on their backs, keys with double cuts without groove and cruciform
keys (Fig. 21);
-
Side B
of the clamp: for keys placed on their backs and having cuts with a depth of less than 3,9 mm (Fig. 21);
-
Side C
of the clamp: for ASSA
®
D-12 type keys (Fig. 22).
-
Side D
of the clamp: for ASSA
®
DP and CLIQ type keys (Fig. 23).
Operating manual
REKORD PRO d-12
Copyright Silca S.p.A 2022
16
