4 MACHINE INSTALLATION AND PREPARATION
The REKORD PRO d-12 key-cutting machine can be installed by the purchaser and does not require any special
skills. However, some checks and preparation for use need to be carried out by the operator.
4.1 Checking for damage
The REKORD PRO d-12 key-cutting machine is solid and compact and will not normally damage if transport,
unpacking and installation have all been carried out according to the instructions in this manual.
However, it is always advisable to check that the machine has not suffered any damage.
4.2 Environmental conditions
To ensure that the best use is made of the REKORD PRO d-12 key-cutting machine, certain parameters must be
borne in mind: damp, badly ventilated sites should be avoided.
The ideal conditions for the machine are:
-
temperature: between 10°C and 40°C;
-
relative humidity: 60% circa;
-
room illumination: approximately 500 Lux.
4.3 Positioning
1) Place the key-cutting machine on a horizontal surface, solid enough to take the weight (19 Kg).
-
to work with ease, we suggest that the workbench be approximately the height of the operator’s hip.
-
it is important to leave clearance of at least 30 cm behind the machine and on each side to ensure proper
ventilation (Fig. 10).
2)
Ensure that the machines voltage is the same as that of the mains power supply, which must be properly earthed
and provided with a differential switch.
3) Connect the power supply cable to the power supply socket (chap.4.4.2 and chap.4.5).
100/120 cm
30 cm
30 cm
30 cm
Fig. 10
Operating manual
REKORD PRO d-12
Copyright Silca S.p.A 2022
10
