TP17 / TPM
Construction and function
Technical changes reserved
- 13 -
To enable connection to a PC, the RS 485 signals have to be externally converted into RS 232
or USB signals. Appropriate converters including drivers are optionally available. The PC
records all the operating data and enables the programming of all the calibrator’s
configuration parameters.
The minimum requirements for operation with a USB converter are:
•
IBM compatible PC,
•
installed operating system Windows 7, Windows 8 or Windows 10,
•
a free USB port (USB 1.1 or USB 2.0).
A network configuration allows the
connection of up to 32 calibrators / micro
baths to the same network.
Certain factory settings have to be carried
out to enable configuration of a network. In
this case, please contact your supplier or
SIKA directly.
PLEASE NOTE:
If you access the programming via the keypad while communication via a serial interface
is running, the message
"buSy"
appears on the display.
Network configuration
