Operation
TP17 / TPM
- 28 -
© SIKA • Ba_TP17-TPM_en • 01/2016
5.2.3
Display of fan/ cooling control
The LED
OUT 2
indicates the status of the output for the fan / cooling control:
a) Heating instrument
The LED
OUT 2
indicates the status of the output for
the fan control:
•
If the LED OUT 2 is lit the fan is running at high
speed.
•
If the LED OUT 2 is not lit the fan is running at
low speed.
b) Heating and cooling instrument
The LED
OUT 2
indicates the status of the output for the cooling control:
•
If LED OUT 2 is lit the temperature is decreased.
•
If LED OUT 2 is not lit the cooling is switched off.
There are two ways to set the set temperature: Either you set a temporary set temperature
(
§ 5.3) or you save the fixed set temperatures in the main menu (
§ 5.4).
5.2.4
Display of heating / cooling capacity and operating duration
In calibration mode, you can check the heating or cooling capacity and the operating duration
of the calibrator. The current values of the calibrator appear on the lower display (green).
Heating or cooling capacity:
Hold down the
key.
The current heating and cooling capacity is displayed in % of the maximum capacity.
"H" indicates the heating capacity and "C" indicates the cooling capacity.
Operating duration:
Briefly press the
key.
The current number of operating hours of the calibrator is displayed for ~5 s.
5.2.5
ConF menu
In the
ConF
menu, system parameters of the calibrator can be set. These settings may only
be carried out by authorised SIKA personnel.
This menu is protected by a password.
CAUTION! Material damage!
The
ConF
menu is protected by a password. Unauthorised access can cause damage to
the calibrator.
Do not try to guess the password.
Exit the menu by pressing the
P
key twice or select another menu item with the
or
key.
Fan / cooling control active
