User Manual
2614 Texoma Drive Denison, TX 75020 • 980 Contract St. Suite 110 Lexington, KY
Phone: 903-462-7700 or toll free 800-899-5655 • Fax: 800-966-6834
21
Chapter 3: The Control Panel
This chapter describes the operation of the EnduraCUT 2 control panel and the navigation
of the menu. When the cutting plotter is ready for use as described in Chapter 1 & 2, all
functions are under default parameters.
3.1 The Control Panel
Key
Function
LCD Screen
To display functions and error messages.
Power LED
To indicate the power status ( light up: power on; light off: power off )
4 Arrow Keys
To move blade holder or media, select functions, or change settings.
ENTER
To set item or register the immediately preceding input value.
PAUSE/RESUME
To temporarily halt or continue cutting process
ON/OFF LINE
To switch modes, stop cutting job, or abort setting changes.
OFFSET
To adjust the value of blade’s offset.
FORCE
To adjust the value of cutting force.
SPEED
To adjust the value of cutting speed and quality.
CUT TEST
To perform cutting tests on different media.
DATA CLEAR
To clear buffer memory.
TOOL SELECT
To select tools.
MISC
To set up functions.
EnduraCUT 2 LCD Control Panel Functions
