User Manual
2614 Texoma Drive Denison, TX 75020 • 980 Contract St. Suite 110 Lexington, KY
Phone: 903-462-7700 or toll free 800-899-5655 • Fax: 800-966-6834
33
4.2.2 After loading the media on the brackets, roller tray, or stand, pull the front edge for-
ward under the pinch rollers.
1. Pull it toward the front edge of the platen and use the ruler to check alignment. The side
edges of the media should be perpendicular to the front of the plotter.
2. After loading the roll media, flatten the media on the platen and hold the front edge of
the roll media firmly to ensure that the roll is straight.
3. Move the pinch rollers to the precise location and be careful that the pinch rollers are
positioned above the grit rollers (under the white marks).
6. Push the lever downward to lower the pinch rollers.
7. Turn on the power switch, and the tool carriage will size the media automatically. Then
the cutting plotter is ready to work.
8. Unloading media: Reversing steps mentioned above to remove the media.
4.3 Optimizing Tracking
In order to achieve the best tracking performance for a long plot, please leave the margin
of 0.5mm~25mm in the left and right edges of the media. (Figure 4-6)
Figure 4-6
