User Manual
2614 Texoma Drive Denison, TX 75020 • 980 Contract St. Suite 110 Lexington, KY
Phone: 903-462-7700 or toll free 800-899-5655 • Fax: 800-966-6834
8
Chapter 2: Installation
2.1 Precautions
Notice 1
•
Carefully handle the cutter to prevent any injuries.
•
Make sure the power switch is off before installing the cutting plotter.
Notice 2
A proper place for installation the cutting plotter
Please select a proper location that meets the following conditions:
• The machine can be approached easily from any direction.
• Keep at least 2feet (60 cm) of clear space in front and behind the machine.
• Make sure the cutter is placed on a flat, level and sturdy surface
• The operation temperature should be between 60° and 86°F (15° to 30°C) in the workshop.
• The relative humidity of the working environment should be between 25% to 75%.
• Protect the machine from dust and air current.
• Prevent the machine from direct sunlight.
Notice 3
Connecting the Power Supply
Check the plug of the power cord to see if it matches the wall outlet. If not, please contact your dealer.
• Insert the plug (male) into a grounded power outlet.
• Insert the other end (female) of power cord into the AC connector of cutting plotter.
