User Manual
2614 Texoma Drive Denison, TX 75020 • 980 Contract St. Suite 110 Lexington, KY
Phone: 903-462-7700 or toll free 800-899-5655 • Fax: 800-966-6834
17
4: After you have selected the make and model of the cutter, click Next at the bottom of the
Add Setup window. The next screen in the Add Setup window will prompt you to choose a
port by asking “How is your enduraCUT 2S connected to your computer?”. Click the arrow to
show the drop-down menu (Fig 2-18) and, from the list of ports, choose USB_Printer_1 .
5: Now that you’ve added the plotter to your LXI Production Manager, you need to perform
a test cut to make sure the printer port you’ve selected is the one to which the plotter is ac-
tually connected to your PC. Most PCs have more than one USB port, so you may have select-
ed a port other than the one to which you’ve connected the plotter.
To test this, right click on “EnduraCUT 2S” in Production Manager. From the drop-down
menu, click Test Cut (Fig 2-19). This will send a cut command to the plotter. If it responds and
cuts a square pattern, you have completed the setup and are ready to use the plotter.
NOTE:
Make sure the cutter is turned on, online, and has vinyl loaded before proceeding.
Figure 2-18
Figure 2-19