40
MAINTENANCE
Clean
Speed Clean
This 15-minute process takes advantage of the steam
generator in the oven to help lift light soil.
Speed Clean can be used when the temperature
inside the oven is below 65 °C. Please use after
cooling.
Setting Speed Clean
1
Remove oven racks and accessories from the
oven.
2
Fill the water tank with water to the maximum fill
line (34 oz/1000 cc).
3
Touch
Clean
.
4
Touch
Speed Clean
.
5
Touch
Start
. The remaining time appears in the
display.
Water Tank
The water tank is used during the steam cooking
functions. Use filtered, softened water if possible.
NOTE
•
After using the steam function, the water tank
should be drained. To avoid bacteria or odours,
clean and dry the water tank after every use.
•
Do not clean in a dishwasher.
hard Water Scale
If hard water is used in the water tank, the steam
generator may become clogged with hard water
scale. In areas with hard water, run the Descaling
function frequently or use softened water.
Cleaning Scale on Oven Bottom
To remove mineral deposits that remain on the oven
bottom after using the steam mode, use a cloth
or sponge soaked in vinegar or a weak citric acid
solution.
Steam Maintenance
Descaling
After the steam mode is used for 8 hours, a reminder
to descale the product appears in the display the next
time the steam mode is selected. You will not be able
to use the steam mode until the Descaling function
has run. To avoid this delay, run the Descaling
function after every 2-3 uses of the steam mode.
For instructions on removing and filling the water
tank, see "Using the Water Tank."
Setting Descaling
1
Fill the water tank with a 20:1 mixture of water
and citric acid. For example, use 4 tsp of citric
acid in 4
1
/
4
cups water (20 g citric acid in 1000
ml water).
2
Insert the water tank into the slot over the oven
cavity and push it in until it clicks into place.
3
Touch
Clean
, Steam Maintenance and Descaling
in that order.
4
After about 17 minutes of descaling, a pop-
up will appear in the display. Following the
architecture, drain the tank and fill it with clean
water.
5
Insert the tank and start the Rinsing function.
6
Once the Rinsing function is complete, dry the
inside of the oven with a soft cloth.
NOTE
The Rinsing function must be completed even if
the Descaling function is canceled.