Sierra Wireless MP 700 Series, Справочник по командам

Страница: 82 / 118

MP 700 Series GPS AT Command Reference
80 2130309
+CMGR (continued) Read SMS message (continued)
Returned values
Returned parameters are as described in
+CMGL
(page 79), with the addition
of:
<fo>
The first octet of the SMS message according to the ETSI
recommendation 03.40.
<pid>
The Protocol-Identifier in integer format (default 0) .
<dcs>
Depending on the command or result code: GSM 03.38 SMS Data Coding
Scheme (default 0) , or Cell Broadcast Data Coding Scheme in integer
format
<sca>
A string representing the Service Center address field; the type of address
is given by
<tosca>
.
<tosca>
Type-of-Service Center Address octet in integer format. As with
<tooa>
and
<toda>
, when the first character of the phone number is “+” (IRA 43),
the default is 145; otherwise the default is 129.
PDU mode:
+CMGS=
<length>
or
Text mode:
+CMGS=<da>
[,<toda>]
Send SMS message
Sends an SMS message to the network (SMS-SUBMIT) directly, without
requiring that it be stored in memory. A message reference value
<mr>
is
returned if the message has been successfully delivered, in the form
+CMGS: <mr>
. It can be used to identify the message if an unsolicited delivery
status report result code is returned.
PDU mode The PDU-mode send command is:
+CMGS=<length><CR>
<PDU data>
<CTRL+Z>
<length>
must indicate the number of octets coded in the TP layer data unit to
be given (i.e. SMSC address octets are excluded). The
<pdu data>
must be in
hexadecimal format (as specified for
<pdu> on
page 79) and given in one line.
The Sierra Wireless modem converts this coding into the actual octets of the
PDU. When the length octet of the SMSC address (given in the
<pdu data>
)
equals zero, the SMSC address set with command Service Centre Address
+CSCA
(see page 93) is used.
Text mode
In text mode, the command is in the form:
+CMGS=<da>,<toda><CR>
<message text>
<CTRL+Z>
Continued on next page.
Table 3-9: Command Reference Table (ASCII Alphabetic)
Command Description