Sierra Monitor Corporation 3600I, Инструкция по эксплуатации

Страница: 50 / 65

3600I
Page: 42
A.7 ENVIRONMENTAL SPECIFICATIONS
The 3600I is designed to withstand harsh environmental conditions.
High Temperature
• Designed to meet MIL-STD-810C, method 501.1
procedure II
• Operating temperature: +167°F (+75 °C)
• Storage temperature: +185 °F (+85 °C)
Low Temperature
• Designed to meet MIL-STD-810C, method 502.1,
procedure I
• Operating temperature: -57°F (-50°C)
• Storage temperature: -65°F (-55°C)
Humidity
• Designed to meet MIL-STD-810C, method 507.1,
procedure IV
• Relative humidity of up to 95% for the operational
temperature range
Salt Fog
• Designed to meet MIL-STD-810C, method 509.1,
procedure I
• Exposure to a 5% Salt Solution Fog for 48 hours
Dust
• Designed to meet MIL-STD-810C, method 510.1,
procedure I
• Exposure to a dust concentration of 0.3 frames/cubic
ft. at a velocity of 1750 fpm, for 12 hours
Vibration
• Designed to meet MIL-STD-810C, method 514.2,
procedure VIII
• Vibration at an acceleration of 1.1g within the
frequency range of 5-30 Hz, and an acceleration of
3g within the frequency range of 30-500 Hz
Mechanical Shock
• Designed to meet MIL-STD-810C, method 516.2,
procedure I
• Mechanical Shock of 30g half-sine wave, for 11 msec
Electromagnetic
Compatibility (EMC)
See Table 26
Table 26:
Electromagnetic Compatibility (EMC)
Test Standard Level Per
Electrostatic Discharge ESD IEC 61000-4-2 IEC 61326-3
Radiated EM Field IEC 61000-4-3 IEC 61326-3
Electrical Fast Transients IEC 61000-4-4 IEC 61326-3
Surge IEC 61000-4-5 IEC 61326-3
Conducted Disturbances IEC 61000-4-6 IEC 61326-3
Power Ferq. Magnetic Field IEC 61000-4-8 IEC 61326-3
Radiated Emission IEC 61000-6-3 EN 55022
Conducted Emission IEC 61000-6-3 EN 55022
Immunity to Main Supply Voltage Variations MIL-STD-1275B
To fully comply with EMC directive and protect against interference caused by RFI and
EMI, the cable to the detector must be shielded and the detector must be grounded.
The shield should be grounded at the detector end.