9 – 102
1)
ANSI-Definition:
Verhältnis des größten Unterschiedes der Phasen zum Mittelwert der Phasen.
Über- bzw. unterschreitet einer dieser ermittelten Messwerte den
für ihn eingestellten Wert, wird nach Ablauf der eingestellten Verzö-
gerung über den
c
eine Meldung ausgegeben.
Die Einstellung der Parameter kann erfolgen über:
- den BDA
- den PROFIBUS-DP
- den MODBUS
- das Grafikdisplay (ETU776).
Messfunktion
PLUS
Die Messfunktion
Plus
bietet gegenüber der Messfunktion zwei
zusätzliche Funktionen:
- zwei unabhängige Kurvenformspeicher
- harmonische Analyse
Die zwei unabhängigen Kurvenformspeicher können zur Analyse
der Strom- und Spannungswerte zur Zeit eines Ereignisses genutzt
werden.
Sind die Kurvenformspeicher auf „Aufzeichnung“ (Standardeinstel-
lung) parametriert, so erfolgt eine fortwährende Aufzeichnung bis
zum Eintreffen eines zuvor definierten Ereignisses. Dann wird die
Aufzeichnung gestoppt und man kann über eine Visualisierung
(Grafikdisplay, Laptop bzw. PC) die Kurvenverläufe des Stroms bzw.
der Spannung zur Zeit des Ereignisses betrachten. Das Zeitfenster
beträgt eine Sekunde. Die Auflösung beträgt 1649 Werte/Sekunde.
Die Kurvenformspeicher können über Kommunikationskanäle
(PROFIBUS-DP, MODBUS,
c
) manuell auch einzeln
gestartet bzw. gestoppt werden.
Langzeitmittelwert Blindleistung überschritten
KVAR demand
1 - 12000 kVar
0 - 255
sec.
Blindleistung überschritten Bezug
KVAR consumed
1 - 12000 kVar
0 - 255
sec.
Blindleistung überschritten Einspeisung
KVAR delivered
1 - 12000 kVar
0 - 255
sec.
Scheinleistung überschritten
KVA
1 - 12000 kVA
0 - 255
sec.
Überfrequenz
overfrequency
40 - 70 Hz
0 - 255
sec.
Unterfrequenz
underfrequency
40 - 70 Hz
0 - 255
sec.
Leistungsfaktor unterschritten
underpower factor (PF)
-0.001 - 0.001
0 - 255
sec.
Leistungsfaktor überschritten
overpower factor (PF)
-0.001 - 0.001
0 - 255
sec.
Klirrfaktor Strom überschritten
current THD
3 - 50 %
0 - 255
sec.
Klirrfaktor Spannung überschritten
voltage THD
3 - 50 %
0 - 255
sec.
Scheitelfaktor überschritten
crest factor
1 - 2.55
0 - 255
sec.
Formfaktor überschritten
form factor
1 - 2.55
0 - 255
sec.
Messgrößen für Kurvenformspeicher
Ströme
I
L1
, I
L2
, I
L3
, I
LN
, I
g
Spannungen
U
L1
, U
L2
, U
L3
Parameter
Range
Bereich
Delay
Verzögerung
1)
ANSI definition:
Ratio of the largest difference between the phases and the average of all 3
phases.
If one of these parameters exceeds or falls below its default set-
tings, the trip unit is tripped after the adjusted delay via the
c
.
The parameters can be adjusted via:
- the test socket with the BDA
- the PROFIBUS-DP
- the MODBUS
- the graphical display (ETU776).
Metering function
PLUS
The metering function
Plus
offers two additional functions in com-
parison to the standard metering function:
- two independent waveform capture buffers
- harmonic analysis
The two independent waveform buffers can be used to analyze the
current and voltage values at the time of the event.
If the waveform buffers are programmed to "recording" (standard
setting), there is continuous recording until a previously defined
event occurs. Then, the recording is stopped, and the current or
voltage waveforms at the time of the event can be observed on a
visual display (graphical LCD, laptop or PC). The time window is
one second; the resolution is 1649 values/second.
The waveform buffers can also be started or stopped individually via
the communication channels (PROFIBUS-DP,
c
).
Settings for waveform capture
Currents
I
L1
, I
L2
, I
L3
, I
LN
, I
g
Voltages
U
L1
, U
L2
, U
L3
Содержание WL Series
