Siemens TIASTAR SFIM-70020 Скачать руководство пользователя страница 98

Страница: 98 / 118

Important Additional Features:

• All wiring and components meet or

exceed the requirements of UL, CSA,
ENEMA, EEMAC and NEC.

• Pre-wired components are

professionally harnessed to industrial
terminal blocks.

• Full depth wire tie rods are standard

in each vertical wireway.

• White interior increases visibility for

easy wiring, maintenance and
inspection.

• Modular units are fully

interchangeable.

• Each TIASTAR MCC is designed to

satisfy your most exacting
specifications.

• White on black base operating handle

is easy to identify.

The horizontal bus compartment is

isolated from the horizontal

wireways by a crystal clear Lexan

barrier that makes visible and

infrared maintenance inspection a breeze.

The barrier is easily removed when

access to the horizontal bus is required.

Horizontal bus design keeps

the bus in the top 12”

of the structure, never behind

units, for easy maintenance

and accessibility.

Copper bus and heavy-duty

insulators safely distribute power

to sections. Copper bus,

standard throughout, is conservatively

rated at 50-degree rise and

provides up to an optional 100,000A

withstand capacity.

A copper clip on plug-in

units engages and

grounds units at all times.

The unit disconnect operating handle

features a simple, rugged design.

“ON” and “OFF” are clearly indicated

by position, color and word.

The “TRIP” indication is clearly

displayed on circuit breaker

equipped units.

A screwdriver operated

defeater mechanism allows

access to an energized

unit by authorized personnel.

All doors swing open

a minimum of 110° for easy

unit access and removal.

Содержание TIASTAR SFIM-70020























































































































Результаты поиска

Содержание TIASTAR SFIM-70020

Отзывы:

Похожие инструкции для TIASTAR SFIM-70020

Бренды по названию

Популярные бренды

Siemens TIASTAR SFIM-70020, Руководство пользователя

Результаты поиска

Содержание TIASTAR SFIM-70020

Отзывы:

Похожие инструкции для TIASTAR SFIM-70020

Бренды по названию

Популярные бренды