Siemens Synova FC330A, Руководство по эксплуатации

Страница: 29 / 58

e1973c-4
02.2004
25
Fire & Security Products
Siemens Building Technologies Group
Enable single zones
1.
Enter the number of a zone to be ena-
bled (e. g. 2).
Display shows
With a running timeout after which the
zone is automatically enabled.
2. Enter another zone number to enable
or press
F1
to enable the zone before
the timeout has expired.
Display shows
for a few seconds
or
3. Press
hm
to go back to the submenu.
Display shows
Enable a range of zones
1.
Enter the first number of a zone range
to be enabled (e. g. 2).
Display shows
2. Enter the last number of the zone range
(e. g. 5).
Display shows
With a running timeout after which the
zone range is automatically enabled.
3. Press
F1
to enable all zones before the
timeout has expired.
Display shows
for a few seconds
or
4. Press
hm
to go back to the submenu.
Display shows
Enable all disabled zones
1.
Enter
555
to enable all disabled zones,
no matter if all zones, a range of zones
or single zones were disabled.
Display shows
With a running timeout after which all
zones are automatically enabled.
2. Press
F1
to enable all zones before the
timeout has expired.
Display shows
for a few seconds
or
3. Press
hm
to go back to the submenu.
Display shows
MONITORING zone ###, wait.
(F1 /hm = enabling) next zone?
ENable zones:
> all zones ENABLED
timeout /hm: menu Stop: end operating
ENabling: 1. detector ’zone’
(1.1) 2. detector ’element’
3. ConTrol ’zone’
4. All Fire Ctrl ’zones’
ENable zone range ### to ###
> confirm LAST zone no.?
MONITORING zones ###−###, wait
(F1 /hm = enabling) > LAST zone
ENable zones:
> all zones ENABLED
timeout /hm: menu Stop: end operating
DISabling: 1. detector ’zone’
(2.1) 2. detector ’element’
3. ConTrol ’zone’
4. All Fire Ctrl ’zones’
MONITORING zone ###, wait
(F1 /hm = enabling) > LAST zone
ENable zones:
> all zones ENABLED
timeout /hm: menu Stop: end operating
DISabling: 1. detector ’zone’
(2.1) 2. detector ’element’
3. ConTrol ’zone’
4. All Fire Ctrl ’zones’