Siemens Synova FC330A, Руководство по эксплуатации

Страница: 11 / 58

e1973c-2
02.2004
7
Fire & Security Products
Siemens Building Technologies Group
SELECT: 1. ENabling
(main menu) 2. DISabling
3. INFO polling
4. other functions
FUNCTIONS: 1. function
(4) 2. system TEST
3. printout
4. configuration
FUNCTIONS: 1. switching alarm org.
(4.1) 2. set time / date
Switching manned $ unmanned via menu
Set or adjust time and date
SYSTEM TEST: 1. horn
(4.2.1) 2. alarm contacts
3. RT−alarm
4. RT−fault
Activate all ’horns’ for 30 sec
Activate all ’alarm contacts’ for 30 sec.
Activate ’remote alarm’ for 30 sec.
Activate ’remote fault’ for 30 sec.
SYSTEM TEST: 1. horn/al.contact/RT
(4.2) 2. lamps/battery
3. fire and contr.zones
SYSTEM Test: 1. lamps/display
(4.2.2) 2. battery
Activate all LEDs and LCD for 10 sec.
Load battery for 10 sec.
Set detectors to ’Detector test’ per zone
Set detectors to ’Detector test’ zone X...Y
PRINT: 1. system status
(4.3) 2. event memory/alarm counter
3. configuration/user text
4. configuration zone/line/LON
PRINT: 1. fault
(4.3.1) 2. isolation
3. pre−alarm
4. techn.alarm /element status
Print current fault messages
Print current turned off system components
Print current information messages
Print current ELEMENT states
PRINT: 1. event memory
(4.3.2) 2. alarm counter
Print event memory list
Print alarm counter readings
PRINT: 1. configuration system
(4.3.3) 2. configuration coll. line
3. user text detector zn/elem
4. user text ConTrol zone
Print general parameter settings
Print parameter settings coll. lines
Print user texts detector zones / elements
Print user texts control zones
PRINT: 1. configuration det. zones
(4.3.4) 2. configuration addr. lines
3. configuration LON devices
Print parameter settings detector zones
Print parameter settings addr. lines
Print parameter settings LON-bus
page 8
SYSTEM TEST: 1. single zone test
(4.2.3) 2. zone range test
3. set control zones
Set control zone to ’control zone Test’ X..Y